PK 1120, Руководство пользователя

Страница: 5 / 12

UNPACKING INSTRUCTIONS
Carefully remove the components of your 1120 from their shipping packages
and take an inventory of the parts included.
1120P and 1120F Aligner Configurations parts include:
• 1120 Bare Fiber Aligner Coupling Module (1120P-000, 1120F-000) or module
integrated with buffer fiber module (1120P-XXX, 1120F-XXX)
• One 112X-RMC Refillable Index Matching Cartridge
• Cleaning Wire
1120B Buffer Fiber parts include:
• 1120B Buffer Fiber Module with customer-specified connectors
2
Locate the “D-shaped” coupling module end cap on the 1120F. Or, for the 1120P, sim-
ply pull the gray cylindrical end cap from the housing (some initial resistance will be
encountered as the cap is restrained by an internal, spring-loaded ball plunger).
BEFORE YOU BEGIN: Load the the 112X-IMC or
112X-RMC Index Matching Cartridge into the 1120 Bare
Fiber Aligner by following the instructions below.
Unscrew and remove the coupling
module end cap to expose the internal
metal ferrule sleeve.
Remove the plastic tabs that seal the
index matching cartridge. Leave any
other cartridges sealed for later use.
Tab
Tab
After removing the tabs from the car-
tridge, push the larger end of the car-
tridge onto the metal sleeve.
Screw on the end cap to finger tight.
Use the dust cap to seal the protrud-
ing cartridge when not in use.
End Cap
End Cap