PJLink CP-X2021WN, Руководство пользователя

Страница: 25 / 242

16
Use the supplied adapter cover to
prevent the USB wireless adapter from
coming off easily.
1.
Loosen the screw (marked with
triangle) on the bottom right of the
USB TYPE A
port.
2.
Insert the tab of the cover into the
hole at the upper left of the
USB
TYPE A
port in the direction of the
arrow.
3.
Align the screw holes on the
projector and the cover. Then
insert the screw removed from the
projector into the hole and tighten
the screw.
Using the security bar and slot
A commercially available anti-theft chain or
wire can be attached to the security bar on
the projector. Refer to the
 gure to choose
an anti-theft chain or wire.
Also this product has the security slot for
the Kensington lock.
For details, see the manual of the security
tool.
► Do not use the security bar and slot to prevent the projector
from falling down, since it is not designed for it.
WARNING
► Do not place anti-theft chain or wire near the exhaust vents.
It may become too hot.
CAUTION
• The security bar and slot is not comprehensive theft prevention
measures. It is intended to be used as supplemental theft prevention measure.
NOTE
Setting up
Tab
Fastening the adapter cover
► Keep small parts away from children and pets. Take care not
to put in the mouth.
WARNING
2
3
Security slot
Anti-theft
chain or wire
security bar
18mm
18mm
12mm
18 mm
12 mm
18 mm
10 mm
Installation surface
1