PJLink CP-X2021WN, Руководство пользователя

Страница: 178 / 242

62
7.4 Command Control via the Network
You can con  gure and control the projector via the network using RS-232C
commands.
Communication Port
The following two ports are assigned for the command control.
Command Control Settings (
22
)
4) Click the
[Enable] check box to open Network Control Port1 (Port: 23) to use
TCP #23. Click the
[Enable] check box for the [Authentication] setting when
authentication is required, otherwise clear the check box.
5) Click the
[Enable] check box to open Network Control Port2 (Port: 9715) to
use TCP #9715. Click the
[Enable] check box for the [Authentication] setting
when authentication is required, otherwise clear the check box.
6) Click the
[Apply] button to save the settings.
Con  gure the following items from a web browser when command control is used.
Example
: If the IP address of the projector is set to
192.168.1.10:
1) Enter “ http://192.168.1.10/ ” into the address bar of the web browser, and select
Projector Web Control from the selection window.
2) Enter your user name and password, and then click the [OK] .
3) Click the
[Port Settings] on the main menu.
7. Other Functions
TCP #23
(Network Control Port1 (Port: 23))
TCP #9715
(Network Control Port2 (Port: 9715))
• Command control is available only via the speci  ed port above.
NOTE