PJLink CP-X2021WN, Руководство пользователя

Страница: 147 / 242

31
Item
'HVFULSWLRQ
Time difference
Con  gures the time difference. Set the same time difference
as the one set on your computer. If unsure, consult your IT
manager.
SNTP
Click the [ON] check box to retrieve Date and Time
information from the SNTP server and set the following items.
SNTP Server Address
Con  gures the SNTP server address in IP format.
• The address allows not only IP address but also domain
name if the valid DNS server is setup in the
Network
Settings . The maximum length of host or domain name is up
to 255 characters.
Cycle
Con  gures the interval at which to retrieve Date and Time
information from the SNTP server (
hour:minute ).
Click the
[Apply] button to save the settings.
• The new con  guration settings are activated after restarting the
network connection. When the con  guration settings are changed, you must
restart the network connection. You can restart the network connection by
clicking the [Network Restart] on the main menu(
41
).
• If you connect the projector to an existing network, consult a network
administrator before setting server addresses.
• Once you turn off the projector in the SAVING mode (
SETUP menu in the
Operating Guide
) or the AC power, the current date and time setting is reset.
• To enable the SNTP function, the time difference must be set.
• The projector will retrieve Date and Time information from the time server and
override time settings when SNTP is enabled.
• The internal clock’s time may not remain accurate. Using SNTP is
recommended to maintain accurate time.
NOTE
3.1 Projector Web Control - Date/Time Settings (continued)
3. Web Control