Pixsys HMI series, Быстрый старт

Страница: 19 / 44

User manual - HMI Series - 19
To change the visualization format, it is
necessary to select the variable and press .
On the window that opens, select the chosen
format and confirm pressing “OK” .
13 Interfacing Movicon 11 with LogicLab
NB : Movicon 11.5 or greater.
To execute only once:
Following steps are to be completed on the PC which will be used to develop the projects.
Go to download area of Pixsys website / Movicon section and download “MOVICON 11.6 Update-Ag-
giorna Driver.exe” corresponding to your PC system. Double click to launch the .exe file and follow
instructions.
Do the same procedure also if a Panel PC (TD750-TD850-TD900-TD910-TD920) is used.
Note: with this procedure all PLC system variables and variables created and used in the PLC are
imported.
The creation and the updating of the PLC variables list is done only if the LogicLab program is
compiled without errors and downloaded on the target.
13.a
Creating a new Movicon project
Start the software and choose the platform “
Windows® X86 / X64
” for Panel-PC or “
Windows® CE
Platform
” for HMI and for
“WEB”
version of PL500. If the new Movicon project is being created following
the Wizard, at the end it will visualize the driver configuration window, switch to the section
“Driver
Configuration”
to
par. 12.b
. If the driver is being installed manually, proceed as follow:
Add the communication driver with a
right click on “Real time DB” and then “new
communication driver” .
Select “Pixsys” from the manufacturer menu
and then “Pixsys SoftPLC Driver” .
Confirm with “OK” and double click on the
driver just created to open the configuration
window.