Pixsys HMI series, Быстрый старт

Страница: 15 / 44

User manual - HMI Series - 15
This window allows to select backup options:
- PLC_LOGICLAB (RUNTIME PROJECT): for backup of LogicLab project and complete Runtime and
also of the configuration completed in the window PLC_LOGICLAB (accessible from main window
of TDControlPanel)
- HMI_MOVICON (PROJECT): for backup of single Movicon project and configuration completed in
the window HMI_MOVICON (accessible from main window of TdControlPanel)
- HMI_MOVICON (RUNTIME): backup only for Runtime
- TdControlPanel (Configuration): for backup of complete configuration performed within different
utilities accessible from main window of TdControlPanel. *Attention: this backup will include also
the eventual Password for TdControl Panel if it has been set in WIN EXPLORER
- LAN (IP CONFIGURATION): for backup of network settings of HMI
- BOOT SCREEN: for backup of background image visualized during system start up
Tick all boxes to obtain a complete backup of the settings and software projects stored on the HMI.
This is useful and time-saving when requested to program multiple HMIs for same application.
Press BACKUP TO USB DISK to open USB memory
connected to the device; it will be possible to select
destination folder and name for backup file 8default file
name will be date and time of backup creation)
Press OK to start backup (Hourglass will show up ).
A confirmation popup will advice when process will be
completed. Press OK to close popup , press ESC , then the
device may be switched off.
RESTORE procedure to restore LogicLab and Movicon projects on HMI.
To program a new HMI starting from an existing Backup
keep pressing STOP icon during start up of the device
TDControlPanel window will be opened