Pixsys HMI series, Быстрый старт

Страница: 11 / 44

User manual - HMI Series - 11
8 Ethernet interface
8.1 Technical data
This Ethernet controller is connected to external devices via the system unit.
Ethernet 1 interface (ETH1) TD410-AD / TD710-AD and -L TD810-AD / TD820-AD / TD830-AD
Number of ports 1 2
Controller LAN8710A
Cabling S/STP (Cat 5e)
Transfer rate 10/100 Mbit/s
10/100 Mbit/s ETH1-ETH2 to CPU
Link
10/100/1000 Mbit/s ETH1-ETH2 link
Cable length Max. 100 m (min. Cat 5e)
LED
Green Link
On = Gigabit connection
Off = 10/100 Mbit connection
Yellow 10/100 Mbit Activity
On =Link
Blink = Activity (data transfer)
9 Internal ethernet Switch (only TD810-TD820-TD830)
Two Ethernet 10/100/1000 Mbit ports on the rear side of the
operator panel are available. ETH1 and ETH2 are internally
connected to CPU through a Gigabit switch.
Thanks to dual port it is possible to make daisy-chain of more
devices without using external ethernet switches.
Using VLAN system option, each port can be used as
separated network interface. See TDControl user manual for
more details.
For TD410 and TD710 only one Ethernet port is available.
LAPTOP
10 Battery
10.1 Internal battery replacement
BIOS and clock store data also in case of power failure thanks to a CR2032 battery placed on the side.
To replace the battery it is necessary to remove the protection and pull out the extraction box using
a blade screwdriver on models TD410/TD710 or by dedicated battery compartment on TD810 and
greaters.