Pixsys HMI series, Быстрый старт

Страница: 7 / 44

User manual - HMI Series - 7
Dimensions
Suggested thickness
Spessore suggerito
2 ÷ 8 mm
Suggested thickness
Spessore suggerito
2 ÷ 8 mm
TD XXX
L W
Wc
Hc
H
Lc
Suggested thickness
Spessore suggerito
2÷8 mm
Models L H W * Wc * Lc Hc
TD410-AD 140 100 36 30 130 89
TD710-AD 204 160 41 35 181 144
TD810-AD 274 216 40 31 260 200
TD820-AD 317 256 42 33 302 242
TD830-AD 406 270 50 41 391 255
* Dimensions refer only to the product without the size of terminals and cables.
4 Power supply and grounding
Danger! This device is only permitted to by supplied by a SELV /
PELV (class 2) power supply or with safety extra-low voltage (SELV)
in accordance with EN 60950.
Connect a 24VDC 1,0A (min.) power supply, as showed into the
figure. Connect the device grounding with a conductor of 18AWG
(2,5mmq) minimum section. For the whole series it is suggested to
use a 24 VDC 1,0A 24VA power supply (Pixsys code 2700.10.008) .
Use Copper, Copper-Clad Aluminium or Aluminium conductors wire
for all electric connection.
Caution! 24VDC power supply line must be protected by a 1,0A fuse.
Caution! Functional ground must be kept as short as possible and
connected to the largest possible wire cross section at the central
grounding point (e.g. the control cabinet or system).