Pixsys DRR245-21-ABC-T, Руководство пользователя

Страница: 76 / 109

14
7.7 Pre-programmed cycle
The pre-programmed cycle function activates by setting or
in parameter 59 .
First option : the controller reaches setpoint1 basing on the
gradient set in parameter 62 , then it reaches maximum power
up to setpoint2. When the process reaches maximum power, this
setpoint is maintained for the time set in parameter 63 . On
expiry, the command output is disabled and the controller displays
.
The cycle starts at each activation of the controller, or via digital input if
it is enabled for this type of functioning (see parameter 61 ).
Second option : start-up is decided only on activation of the
digital input, according to the setting of parameter 61 . On
start-up, the controller reaches setpoint 1 basing on the gradient set in
parameter 62 . When the process reaches this gradient, it is
maintained for the time set in parameter 63 . On expiry, the
command output is disabled and the controller displays .
Time
Setpoint
Natural
cooling
Hold
Setpoint 1
Gradient