Pixsys DRR245-21-ABC-T, Руководство пользователя

Страница: 86 / 109

24
1009 Relay status (0=off, 1=on)
Bit 0 = relay Q1
Bit 1 = relay Q2
Bit 2 = reserved
Bit 3 = SSR RO 0
1010 Heating output percentage
(0-10000) RO 0
1011 Cooling output percentage
(0-10000) RO 0
1012 Alarms status (0=none, 1=active)
Bit0 = Alarm 1
Bit1 = Alarm 2 RO 0
1013 Manual reset: write 0 to reset all alarms.
In reading (0=not resettable, 1=resettable):
Bit0 = Alarm 1
Bit1 = Alarm 2 WO 0
1014 Error flags
Bit0 = Eeprom writing error
Bit1 = Eeprom reading error
Bit2 = Cold junction error
Bit3 = Process error (sensor)
Bit4 = Generic error
Bit5 = Hardware error
Bit6 = L.B.A.O. error
Bit7 = L.B.A.C. error RO 0
1015 Cold junction temperature (tenths of degree) RO ?
1016 Start/Stop
0=controller in STOP
1=controller in START R/W 0
1017 Lock conversion ON/OFF
0=Lock conversion off
1=Lock conversion on R/W 0
1018 Tuning ON/OFF
0=Tuning off
1=Tuning on R/W 0
1019 Automatic/manual selection
0=automatic ; 1=manual R/W 0
1020 TA current ON (Ampere with tenths) RO ?
1021 TA current OFF (Ampere with tenths) RO ?
1022 OFF LINE
1
time (milliseconds) R/W 0
1023 Instant Current (Ampere) RO 0
1
If value is 0, the control is disabled. If different from 0, it is the max. time which can
elapse between two pollings before the controller goes off-line.
If it goes off-line, the controller returns to Stop mode, the control output is disabled
but the alarms are active