Pixsys CNV510-PNET-RTU-A, Руководство пользователя

Страница: 18 / 34

pag. 18
UPDATE DEVICE:
By pressing the “ Update Device ” button it is possible to load the created configuration into the device; and also the Firmware, if is necessary.
If you don’t know the actual IP address of the device you have to use this procedure:
Turn off the Device;
Put Dip2 of ‘Dip-Switch A’ at ON position;
Turn on the device
Connect the Ethernet cable;
Insert the IP “ 192.168.2.205 ”;
Press the “ Ping ” button, must appear “Device Found!”;
Press the “ Next ” button;
Select which operations you want to do;
Press the “ Execute update firmware ” button to start the upload;
When all the operations are “OK” turn off the Device;
Put Dip2 of ‘Dip-Switch A’ at OFF position;
Turn on the device.
At this point the configuration/firmware on the device is correctly updated.
Figure 6: “Update device” windows