Pixsys CNV510-PNET-RTU-A, Руководство пользователя

Страница: 27 / 34

pag. 27
B1 command
This command allows to read the status of the enabling/disabling of the Modbus polls.
REQ:
Byte 0
0xB1
RES:
Byte 0 B1/bit0 B1/bit1 B1/bit2 … Bn/bitn
0xB1 Poll 0 Poll 1 Poll 2 … Poll x
1 = Poll disabled
0 = Poll enabled
Note:
In the UDP message, after the command’s identifier (0xB1), you can read the status of the Modbus Reading requests and then the status of the Modbus writing
requests.
Example:
Referring to the previous example, if we read the status of the enabling/disabling, the response from the converter will be:
Byte 0 Byte 1 Byte 2
0xB0 bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0 bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0
Poll0 Poll1 Poll2 Poll3 Poll4 Poll5 Poll6 Poll7 Poll8 Poll9 Poll10 Poll11 Poll12 Poll13 Poll14 Poll15
1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0