Pixsys ATR244 Скачать руководство пользователя страница 31

Страница: 31 / 148

User manual

- ATR244 - 31

L.L.S.1

Lower Limit Setpoint 1

Lower limit setpoint selectable for command setpoint 1.

-9999..+30000 [digit

1 p. 65

] (degrees.tenths for temperature sensors).

Default

U.L.S.1

Upper Limit Setpoint 1

Uower limit setpoint selectable for command setpoint 1.

-9999..+30000 [digit

1 p. 65

] (degrees for temperature sensors).

Default

1750.

c.re.1

Command Reset 1

Type of reset for command contact 1 (always automatic in P.I.D. functioning)

A. rEs.

Automatic Reset (

Default

)

M. rEs.

Manual Reset (by keyboard or by digital input)

M.rEs.S.

Manual Reset Stored (keeps relay status also after an eventual power failure)

c.S.e.1

Command State Error 1

State of contact for command 1 output in case of error.

If the command output 1 (

Par. 35

c.ou.1

) is relay or valve:

open

Contact or valve open.

Default

Contact or valve closed.

If the command output 1 is digital output (SSR):

off

Digital output OFF.

Default

Digital output ON.

If the command output 1 is 0-10V:

0 V

0 V.

Default

10 v

10 V.

If the command output 1 is 0-20 mA or 4-20 mA:

0 ma

0 mA.

Default

4 ma

4 mA.

20 ma

20 mA.

21.5ma

21.5 mA.

c.Ld.1

Command Led 1

Defines led C1 state corresponding to the relevant output. If the valve command is selected, this

parameter is not managed.

o.c.

ON with open contact or SSR switched off. If command AO1, ON with output 0%, OFF if

100% and flashing between 1% and 99%.

c.c.

ON with closed contact or SSR switched on. If command AO1 ON with output 100%,

OFF if 0% and flashing between 1% and 99%. (

Default

)

c.de.1

Command Delay 1

Command 1 delay (only in ON / OFF functioning). In case of valves it works also in P.I.D. and

represents delay between opening and closure of two contacts.

-3600..+3600 seconds (tenth of second in case of servo valve).

Default

: 0.

Negative: delay when turning off output.

Positive: delay when turning on output.

c.S.p.1

Command Setpoint Protection 1

Allows or not to modify command setpoint 1 value

FrEE

Modification allowed (

Default

)

Lock

Protected

vA.t.1

Valve Time 1

Valve time related to command 1 (declared by the manufacturer of the valve)

1...300 seconds.

Default

: 60.

Содержание ATR244





















































































































































Результаты поиска

Содержание ATR244

Отзывы:

Pixsys ATR244, Быстрый старт, Страница: 31 / 148

Результаты поиска

Содержание ATR244

Отзывы: