PiXORD 261 series Скачать руководство пользователя страница 51

Страница: 51 / 83

6-5-2. Event Edit

Application developers wish to have different levels of customization within their own applications. They may

build through event manager, the event system provides several trigger sources and action types which allow

administrators to record the emergency images, such as Motion detection, IO control, FTP or EMAIL to outside

world. It’s easy to process --- just fill and submit a simple form.

The PIXORD-261’s event manager provides event control through programmable Event Scripts which are the

combination of several events. Each event works simultaneously. If one of the trigger conditions in event script is

satisfied, then corresponding action will start to execute accordingly. A comprehensive set of “trigger conditions”

and “action commands” allowed to fit in varies of applications without limitation.

Note:

The programmable event script has been supported since firmware version 2.0. All models of the PIXORD

Internet Video Server (PIXORD 4000 / 2000 / 1000), Network Camera (PIXORD 100 / 120 / 200 / 240 / 241 / 205

/ 126) and the Dome Camera (PIXORD 261) are supported.

To start the event manager, simply click

Event

icon, then event frame will pop up as below:

Upper edit window, middle status box, lower message window, and bottom control icons mainly separate the

event frame.

There are two ways to enter the event script. One is to use “

Script Wizard

” which just follows the procedure to fill

Содержание 261 series




















































































Результаты поиска

Содержание 261 series

Отзывы:

Похожие инструкции для 261 series

Бренды по названию

Популярные бренды

PiXORD 261 series, Руководство пользователя

Результаты поиска

Содержание 261 series

Отзывы:

Похожие инструкции для 261 series

Бренды по названию

Популярные бренды