PiXORD 261 series, Руководство пользователя

Страница: 40 / 83

6-2. Network Setting
6-2-1. Network General Settings
IP Address : PIXORD NDC IP address
Subnet Mask : Subnet mask of your LAN. Note that the IP Address above and Gateway IP Address below
should be in the same subnet.
DNS IP Address : Domain name server information is to allow PIXORD NDC to contact external server
with mnemonic domain name (e.g. ftp.PIXORD.com) instead of numeric IP address (e.g. 168.95.1.1).
Gateway IP Address : PIXORD NDc traffic to Internet should go through Gateway, if not setting this, only
Intranet (LAN) can be accessed.
HTTP Connection Port : Specify the HTTP web server listen port for client (browser) connection. Default
uses port 80 (HTTP standard port), valid range from 0~65535.
Note: Before changing the listen port, user must add a port directive “:” in browser URL in order to get
correct connection. (i.e. http://<IP>:<Port > , e.g. http://192.168.0.200:8000 to access the PIXORD ndc with
IP 192.168.0.200 and port with 8000).
These features enable user to use PIXORD NDC behind NAT or IP Sharing devices which could access up
to 65536 PIXORD NDC with one IP Address.
The factory default won’t change the IP Address and Port setting. Once forgetting the specified port of your
PIXORD NDC, you must use ARP & Ping setting to restore the port setting back to 80.
Click “ Submit ” bottom if needed, then PIXORD NDc will automatically store the setting and reboot system
(within 5 seconds to complete boot sequence) to take the setting effective.
40