PiXORD 261 series Скачать руководство пользователя страница 25

Страница: 25 / 83

4-2. Assign IP Address by ARP Command

Note before IP assignment:

Make sure the PIXORD NDC is powered on and connected to the network correctly.

Obtain a unique IP address from your network administrator.

Each PIXORD NDC has unique Ethernet address (MAC address), which is recorded as 12 digits

serial number labeled at the bottom side of PIXORD NDC (e.g. 000429xxxxxx).

Following examples use PC with IP address 192.168.0.1, and going to setup PIXORD NDC server

to IP address 192.168.0.200 whose MAC address is 000429000150.

Do not use

those addresses

featured as examples in this document, always consult your network administrator before assigning an IP

address.

The IP address assigned to the PIXORD NDC shall be the same IP domain (presented as same

subnet mask) as the PC IP address. In our case, a PC IP address is 192.168.0.1 and the PIXORD NDC is

192.168.0.200, so the subnet mask shall be 255.255.255.0. If a PC subnet mask is 255.255.255.128 or

higher, then the domain can’t cover 192.168.0.200, so the setting won’t take effective.

For speedily installing and easily setting the IP Address, the PIXORD Corporation provides an IP

Installer Wizard for you. Please install the application and see the user’s manual for detailed description

and usage.

In Windows, open DOS window.

Enter DOS by <Start

→

Program

→

MS-DOS Prompt>

Ensure the IP address assigned to PIXORD NDC doesn’t occupy by other Host.

In DOS window, entering

<ping 192.168.0.200> shall get “time out” message

C:\>

ping 192.168.0.200

Pinging 192.168.0.200 with 32 bytes of data:

Request timed out.

Ping statistics for 192.168.0.200:

Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),

Approximate round trip times in milliseconds:

Minimum = 0ms, Maximum = 0ms, Average = 0ms

C:\>

Enter command <arp –s [PIXORD NDC IP Address] [PIXORD NDC MAC Address]>

Содержание 261 series




















































































Результаты поиска

Содержание 261 series

Отзывы:

Бренды по названию

Популярные бренды

PiXORD 261 series, Руководство пользователя

Результаты поиска

Содержание 261 series

Отзывы:

Бренды по названию

Популярные бренды