PiXORD 261 series, Руководство пользователя

Страница: 44 / 83

Dynamic DNS Activate : Click on to activate PIXORD DDNS service.
Dynamic DNS Address : Specify address of PIXORD DDNS server, and the default is “ddns.pixord.com”
Dynamic DNS Port : Specify PIXORD DDNS server listen port, and the default is “80”
Router Incoming Port : Specify your router listen port for PIXORD DDNS server to redirect. The router may
configure the different port for incoming (Internet request) and outgoing (Intranet request), e.g. it may configure
to redirect Internet HTTP (port 80) request to Intranet port 8000, then, in this case, we must configure the
“Router Incoming Port” to 80, and inside the PIXORD NDC Network settings should set HTTP port with 8000.
Update Time : Specify the PIXORD NDC updated frequency in seconds, and the default is 600 (10 minutes),
this is interval that PIXORD NDC will automatically send an updated packet to PIXORD DDNS server.
DDNS message : Return messages from remote PIXORD DDNS server, and some hints may help to
diagnostic the reason if register fails.
DDNS addr. CGI fail : It means that PIXORD NDC can’t communicate with Internet world.
Make sure your Network Configuration has correct subnet mask and default gateway, and DNS1
setting is correct and reachable.
Already registered : Another user had registered this name; please change your register
name by changing “Server Name”.
Example: To setup a PIXORD NDC (IP address 192.168.0.200) behind a dialup ADSL router, and wish to
access by name http://demo.ddns.pixord.com . And, the procedure is as below:Configure the ADSL router with
PPPoE enable; LAN IP, 192.168.0.254; and subnet mask, 255.255.255.0.
Assign the ADSL router’s virtual server with service port 80 to server IP 192.168.0.200
Configure PIXORD NDC network configuration with IP address 192.168.0.200; subnet
255.255.255.0; DNS1 with valid DNS address such as 168.95.192.1 or 168.95.1.1; gateway IP
address with 192.168.0.254 (router’s IP); HTTP port with port 80.
Configure server name.
Configure DDNS with Activate; Address “ddns.pixord.com”; DDNS with port 80; Router
Incoming port 80; and update time with 600 (10 minutes). Finally, clicks submit.
If DDNS message success, then enter URL http://demo.ddns.pixord.com on browser.
Consequentially, it will show PIXORD NDC’s home page.
Click “ Save Changes ” bottom if needed for existing data changed in PIXORD NDC when power off.
44