Start and stop times are set by pushing the black pins out for on and inward for off. For
example, to turn the chlorinator on between 6 pm and 10 pm, push all the pins outwards
between 18 and 22. The remainder of the pins should be pushed inwards. With the elements
pushed outwards the timer will turn your equipment on when they reach the black indicators.
With the elements pushed in the timer will turn your equipment off during those times.
If you switch off the unit and pump during its timer cycle by interrupting the supply of power via
the power point or isolation switch, please remember to reset the time clock to present time
when you reconnect unit to power (RP10TH – without quartz battery backup only).
TIMER BYPASS SWITCH (RP10TH AND RP10QTH MODELS ONLY)
(FIG. 1, ITEM 9)
On Pixie™ models fitted with a timer, a timer bypass switch will be found on the right-hand side
of the time clock. This switch allows you to bypass timer functions.
Three functions are available:
TIMER:
The time clock will automatically switch your pool equipment on or off at your designated
times.
OFF:
The time clock will not switch, but normal time will be maintained.
BYPASS:
The clock has bypassed all designated functions and will operate pool equipment indefinitely.
PLEASE NOTE: Return switch to ‘timer’ position after using the ‘off’ or ‘by-pass’ functions.