Flex-View Event Presentation Switching Solution
User Manual
5 Hardware Introduction
www.pixelhue.com
23
OPT port: 10G
MVR Card
The MVR card mainly provides the monitoring function. Two dedicated outputs
(connectors 1 and 3) on this card can be configured as MVR connectors with a fixed
resolution of 1920×1080p@60Hz. Connector 2 is for input view and connector 4 is
unavailable currently.
Expansion Card
An expansion card slot is provided for you to customize different cards according to
your requirements. For example, when auxiliary displays such as teleprompters, are
required, an AUX card can help to realize your needs.
LED Work Lights
Two LED work lights are designed to provide adequate light for rear panel operations.
The lights are provided with two switches (red) on both sides of the rear panel as
shown below.
Rear panel LED work lights
Power Connectors
The F4 Lite is equipped with dual redundant power supplies. The load is shared
equally by both power supplies during normal operation. If one fails or is
disconnected, the other one carries the whole load. Connect both power connectors
to the electrical outlets through the provided power cords.
Power specification: 100–240V~, 50/60Hz, 10A–5A
On each power module, there is a dual color LED on its front face, providing the
power supply status information as follows:
Green: The power supply works normally.
Flashing green: The AC power is applied to the power supply unit and the
standby voltage is available.
Orange: The power supply fails or is disconnected.
