Flex-View Event Presentation Switching Solution
User Manual
5 Hardware Introduction
www.pixelhue.com
18
Note
Two LED work lights are located on the inner sides of the chassis lateral plates. For
details, please refer to
LED Work Lights
.
Input Cards
The F4 provides up to 8 input card slots that can accommodate 8 input cards. The
input cards offer the following connectors.
4K connector (DP 1.2, HDMI 2.0): Up to 4K2K@60Hz 4:4:4 8-bit
DL connector (DP 1.1, dual-link DVI): Up to 4K1K@60Hz 4:4:4 10-bit
SL connector (HDMI 1.3, single-link DVI, 3G-SDI): Up to 2K1K@60Hz 4:4:4 10-bit
Output Cards
The F4 provides up to 6 output card slots that can accommodate 6 output cards. The
output cards offer the following connectors.
4K connector (HDMI 2.0): Up to 4K2K@60 4:4:4 8-bit
DL connector (HDMI 1.4, dual-link DVI): Up to 4K1K@60Hz 4:4:4 10-bit
SL connector (HDMI 1.3, single-link DVI, 3G-SDI): Up to 2K1K@60Hz 4:4:4 10-bit
OPT port: 10G
Note
The last output card is used for MVR by default and can also be used as a main
output card. Two dedicated outputs (connectors 1 and 2) on this card can be
configured as MVR connectors with a fixed resolution of 1920×1080p@60Hz.
Expansion Card
An expansion card slot is provided for you to customize different cards according to
your requirements. For example, when auxiliary displays such as teleprompters, are
required, an AUX card can help to realize your needs.
LED Work Lights
Two LED work lights are designed to provide adequate light for rear panel operations.
The lights are provided with two switches (red) on both sides of the rear panel as
shown below.
