Flex-View Event Presentation Switching Solution
User Manual
7 Event Management Software Triton
www.pixelhue.com
101
Color
The
Color
tab allows you to set the layer color parameters, including contrast,
brightness, hue, saturation and so on. The color properties are described in
Table 7-12
Color
Parameter
Description
Contrast
Set the contrast value by dragging the slider, clicking
+
/
-
, or entering
the value manually.
The value ranges from 0 to 100, and defaults to
50
.
Reset
: Reset the contrast to default.
Brightness
Set the brightness value by dragging the slider, clicking
+
/
-
, or
entering the value manually.
The value ranges from 0 to 100, and defaults to
50
.
Reset
: Reset the brightness to default.
Hue/Saturation
Reset
Reset the hue and saturation to defaults.
Hue
The value ranges from –180 to +180, and defaults to
0
.
Saturation
The value ranges from 0 to 100, and defaults to
50
.
Monochrome/Invert Colors
Inver Colors
Select whether to invert the layer color to its complementary color
that combined with the original color makes white (RGB:
255,255,255).
For example, if the original color is red (RGB: 255,0,0), the inverted
color is cyan (RGB: 0, 255, 255).
Monochrome
Select whether to set the layer image to grayscale image.
Input
The
Input
tab allows you to make the layer a no-source layer and set the layer color
and opacity. The input properties are described in
Table 7-13
Input
Parameter
Description
Layer Source
Select
No source
to remove the current input source from the layer
and make the layer filled with a pure color.
Layer Color
Note: When
No source
is selected, the layer color can be set.
Reset
Reset the color settings to defaults.
Red
Adjust the red component individually.
Green
Adjust the green component individually.
