MENU
COLOR
WIRELESS
CHANNEL
ID
SOCKET 1 GROUP
SOCKET 2 GROUP
RECEIVER
MODEL
32
NO
VER 0.7
MENU
COLOR
WIRELESS
CHANNEL
ID
SOCKET 1 GROUP
SOCKET 2 GROUP
RECEIVER
MODEL
32
VER 0.7
MENU
COLOR
WIRELESS
ID
SOCKET 1 GROUP
SOCKET 2 GROUP
RECEIVER
MODEL
32
VER 0.7
MENU
COLOR
WIRELESS
CHANNEL
ID
SOCKET 1 GROUP
SOCKET 2 GROUP
RECEIVER
MODEL
F
VER 0.7
MENU
COLOR
WIRELESS
CHANNEL
ID
SOCKET 1 GROUP
SOCKET 2 GROUP
RECEIVER
MODEL
F
VER 0.7
2.4G Wireless Mode
When choosing
2.4G
wireless transmission, purchase ST-IV, ST-III or
ST-III+ series flash triggers (optional) is needed. If there are other
wireless flash systems nearby, you can change the channel (CH),
identification number (ID) and group (GR) to prevent signal
interference. The channels (CH), identification numbers (ID) and
groups (GR) of the transmitter unit and the receiver unit must be set to
the same.
1.Channel (CH) setting: press the<
>button to enter menu. Turn the
select dial to choose channel. Then, short press the select dial once and
turn it to choose channel from 1 to 32.
2.Identification number (ID) setting: short press the<
>button to enter
menu, turn the select dial to choose ID. Then, short press the select dial
once and turn it to choose ID from OFF and 01 to 99.
3. Group (GR) setting: short press the<
>button to enter menu,in the
menu, turn the select dial to choose the corresponding group of socket 1
or socket 2. Then, short press the select dial once and turn it to choose
group from 0 to 9 and A to F.
11
12
off
+0.9
off
CH
13
8
A
STD
1
/128
3.7
FREEZE
MENU
COLOR
WIRELESS
CHANNEL
ID
SOCKET 1 GROUP
SOCKET 2 GROUP
RECEIVER
MODEL
32
VER 0.7
NO
off
off
CH
13
8
A
STD
1
/128
3.7
FREEZE
off
off
CH
13
8
A
STD
1
/128
3.7
FREEZE
