CORE2400
power pack can be used in combination with the following
option-al accessories so as to achieve best photography effects:
CORE
2400 Flash head,
ST-IV
,
ST-III
and
ST-III+
flash trigger,
PRO
AC
2.4G
Transmitter, softbox, beauty dish, umbrella, snoot, light
stand,
EC2400
5m Extension Cord
,
EC2400
L
10m
Extension Cord,
etc.
AC Power Supply: insert the output end of
power cord into the power socket of power
pack to gain power source.
07
08
Optional Accessories
Power Supply
Power On/Off
Slide power switch to "-" to power on;
Slide power switch to "o" to power off.
Note: Unplug the power cord when
the power pack is not being used.
Operation
There are three modes: OFF, Percentage(1%-100%) and PROP. Short
press the Modeling Lamp Button, and the three modes will be displayed
on the LCD panel in sequence.
1.OFF: the modeling lamp is off.
Modeling Lamp
CORE2400
Power pack is
equipped with a 60W LED
modeling lamp which has two
continuous light-ing modes:
Percentage and PROP.
When connecting the flash head
(optional) into the power socket 1 or 2,
short press the corresponding adjust-
ment button 1 or 2 to set parameters.
Short press ALL button to adjust the
two lights simultaneously.
Flash Light Adjustment
OFF
OFF
CH
13
A
A
STD
1
/8
7.0
MULTI
3 - 50 HZ
Note: When 1200Ws flash head and 2400Ws flash head are plugged into
this power pack at same time, the corresponding display screen of the
1200Ws flash head shows "Not Compatible". In this state, the 1200Ws
lamp holder cannot work, and the 2400Ws flash head works normally.
2.4G
Hz
POWER
CHANNEL
ON [ ]
SET
BUZZ LAMP
TEST
-
-
-
*
0
8
F
7
E
6
D
5
C
4
B
3
A
2
9
1
