Always keep this product dry. Do not use in rain or in damp
conditions.
Do not disassemble. Should repairs become necessary, this
product must be sent to an authorized maintenance center.
Keep out of reach of children.
Do not use the product in the presence of flammable gases,
chemicals and other similar materials. In certain circumstance,
these materials may be sensitive to the strong light emitting
from this product and fire or electromagnetic interference may
result.
Do not leave or store the flash unit if the ambient temperature
reads over 50
℃
. Otherwise the electronic parts may be
damaged.
As this product do not have waterproof function, please take
measures of waterproof in rainy or damp environment.
Turn off the power pack immediately in the event of malfunction.
Before using this product
Please read this manual carefully to make sure the correct operation and
exert the optimum function. And well keep it for future reference.
Thank you for purchasing !
PIXAPRO CORE2400 is a Power Pack with 2400Ws strong power,
stable output, constant color temperature, and built-in PIXAPRO
2.4G
and 433M wire-less system. Collocate with a CORE2400P Flash
Head(optional), the ultra-bright LED Modeling light, and with
CORE2400 built-in
2.4G
wireless ONE system and 433MHz wireless,
it is compatible with PIXAPRO triggers like ST-IV, ST-III and ST-III+
and PRO AC 433MHz.
The
CORE2400
offers:
•
•
•
•
•
•
•
•
•
•
•
S1/S2 Secondary Unit Setting and Secondary Unit Setting with
anti-preflash
Delay Flash:
0.01 to 30s, can be served as second-curtain sync.
With Mask Feature:
Greatly saving your post-production time and money.
3.5 Inch Colors Display:
Intuitive display and precious control.
Stable Color Temperature Mode:
color temperature changes within ±75K over the whole power
range(stable color temperature mode).
LED Modeling Lamp:
60W LED modeling lamp and light brightness can be freely adjusted..
Wireless Compatibility:
With built-in PIXAPRO 2.4G wireless system and 433MHz
wireless system, it is wirelessly compatible with ST-IV, ST-III, ST-III+
series and PRO AC 433MHz, and is equipped with 2 pieces 3.5mm
sync jacks, which can realize a variety of synchronous triggering
methods.
Flash Duration:
The flash duration (t0.1) max. can up to 1/17800s.
2 Kinds of Flash Modes:
Supports manual flash and Multi flash.
Precise Power Control:
Precisely control the power settings in 0.1 stop increment from 1.0 to
10, and 91 stops in total.
2 Power Sockets:
Double power sockets for using one or two flash heads.
Optical Triggering:
03
04
Forward
Warning
