4. Modeling light has continuous and intermittent lighting functions. Short
press<
>to enter the main menu, and turn the select dial to select the
modeling light, then short press the select dial once and rotate the select
dial to select "CONT" or "INTER". Press <
> menu button again to
return to the main interface.
5. Long press the modeling lamp and choose the percentage. Then, turn
the select dial to adjust brightness from 1% to 100%.
MENU
COLOR
WIRELESS
CHANNEL
ID
SOCKET 1 GROUP
SOCKET 2 GROUP
RECEIVER
MODEL
OFF
2.4G
433M
VER 0.7
2.Percentage: 1%~100%(to prevent overheat,
＜
45
℃
the fan rotates in
low speed while
＞
45
℃
in high speed).
3.PROP: The modeling lamp's power changes with the flash's power.
The bigger power the flash has, the brighter the modeling lamp is(to
prevent overheat,
＜
45
℃
the fan rotates in low speed while
＞
45
℃
in
high speed).
With built-in 2.4G and 433MHz wireless, CORE2400 power pack can
be set as a receiver end. Enter the menu to choose wireless on, off,
2.4G or 433MHz wireless mode.
Press the <
> button to enter the main menu. Turn the select dial to
choose wireless. Then, short press the select dial once and turn it to
choose 2.4G or 433MHz mode. Press the <
> button to back to the
main interface and <
> will be displayed onto the left upper corner of
the screen.
Wireless Flash Mode
MENU
COLOR
WIRELESS
CHANNEL
ID
SOCKET 1 GROUP
SOCKET 2 GROUP
RECEIVER
MODEL
CONT
INTER
VER 0.7
15%
+0.9
15%
CH
13
8
A
STD
1
/2
1
/128
3.7
FREEZE
20%
20%
CH
13
8
A
STD
1
/128
3.7
FREEZE
+
0.9
1
/2
20%
+
0.9
20%
CH
13
8
A
STD
1
/2
1
/128
3.7
FREEZE
20%
20%
CH
13
A
A
STD
1
/8
7.0
MULTI
3 - 50 HZ
RPOP
RPOP
CH
13
A
A
STD
1
/8
7.0
MULTI
3 - 50 HZ
09
10
