5
/124
5
/20
EN
This manual is the property of PIUSI S.p.A. Any reproduction, even partial, is forbidden.
suzzarablue side pro/basic
Translated from Italian
ELECTRIC
SHOCK
Electrocution
or death
F
This equipment must be grounded. Improper grounding, setup or usage of
the system can cause electric shock.
Turn off and disconnect power cord before servicing equipment.
Connect only to a grounded electrical outlets.
Use only 3 wire extension cords in accordance with local electrical codes.
Extension cords should have a ground lead.
Ensure ground prongs are intact on power and extension cords.
Do not expose to rain. Store indoors.
Never touch the electric plug of socket with wet hands.
Do not turn the dispensing system on if the power connection cord or other
important parts of the apparatus are damaged, such as the inlet outlet plumb-
ing, dispensing nozzle or safety devices. Replace damaged components be-
fore operation.
Before each use check that the power connection cord and power plug are
not damaged. If damaged, have power connection cord replaced before use
by a qualified electrician.
The electrical connection between the plug and socket must be kept well
away from water.
Unsuitable extension leads can be hazardous, in accordance with current regulations.
only extension cords that are labelled for outdoor use and have a sufficient conduc-
tion path should be used outdoors.
For safety reasons, we recommend that, in principle, the equipment be used only with a earth-
leakage circuit breaker (max 30 mA).
Electrical connections must use ground fault circuit interrupter (GFCI).
Installation operations are carried out with the box open and accessible elec-
trical contacts. All these operations have to be done with the unit isolated
from the power supply to prevent electrical shock!
EQUIPMENT
MISUSE
Misuse can
cause death or
serious injury
!
Do not operate the unit when fatigued or under the influence of drugs or
alcohol.
Do not leave the work area while equipment is energized or under pressure.
Turn off all equipment when equipment is not in use.
Do not alter or modify equipment. Alterations or modifications may void
agency approvals and create safety hazards.
Route hoses and cables away from traffic areas, sharp edges, moving parts,
and hot surfaces.
Do not kink or over bend hoses or use hoses to pull equipment.
Keep children and animals away from work area.
Comply with all applicable safety regulations.
Burn Hazard
Equipment surfaces and fluid that is heated can become very hot during
operation
To avoid severe burns do not touch hot fluid or equipment.
Toxic Fluid or
Fumes Hazard
Read MSDS’s to know the specific hazards of the fluids you are using.
Store hazardous fluid in approved containers, and dispose of it according to
applicable guidelines.
Prolonged contact with the treated product may cause skin irritation: always
wear protective gloves during dispensing.
