M0195 b
4
/20
Installation, use and maintenance
2
GENERAL WARNINGS
Warnings
To ensure operator safety and to protect the dispensing system from potential dam-
age, workers must be fully acquainted with this instruction manual before attempting
to operate the dispensing system.
Symbols used
in the manual
The following symbols will be used throughout the manual to highlight safety infor-
mation and precautions of particular importance:
ATTENTION
This symbol indicates safe working practices for operators and/or potentially ex-
posed persons.
WARNING
This symbol indicates that there is risk of damage to the equipment and/or its
components.
NOTE
This symbol indicates useful information.
Manual pres-
ervation
This manual should be complete and legible throughout. It should remain available to end
users and specialist installation and maintenance technicians for consultation at any time.
Reproduction
rights
All reproduction rights are reserved by Piusi S.p.A. The text cannot be reprinted
without the written permission of Piusi S.p.A.
© Piusi S.p.A.
THIS MANUAL IS THE PROPERTY OF Piusi S.p.A.
ANY REPRODUCTION, EVEN PARTIAL, IS FORBIDDEN.
This manual belongs to Piusi S.p.A., which is the sole proprietor of all rights indicated
by applicable laws, including, by way of example, laws on copyrights. All the rights
deriving from such laws are reserved to Piusi S.p.A.: the reproduction, including par-
tial, of this manual, its publication, change, transcription and notification to the pub-
lic, transmission, including using remote communication media, placing at disposal of
the public, distri¬bution, marketing in any form, translation and/or processing, loan
and any other activity reserved by the law to Piusi S.p.A..
3
SAFETY INSTRUCTIONS
ATTENTION
Mains - pre-
liminary checks
before inst
You must avoid any contact between the electrical power supply and the
fluid that needs to be FILTERED.
Maintenance
control
Before any checks or maintenance work are carried out, disconnect the
power source.
FIRE AND
EXPLOSION
When flammable
fluids are present
in the work area,
such as gasoline
and windshield
wiper fluid, be
aware that flam-
mable fumes can
ignite or explode.
To help prevent
fire and explosion:
Use equipment only in will ventilated area.
Keep work area free of debris, including rags and spilled or open containers
of solvent and gasoline.
Do not plug or unplug power cords or turn lights on or off when flammable
fumes are present.
Ground all equipment in the work area.
Stop operation immediately if static sparking occurs or if you feel a shock. Do
not use equipment until you identify and correct the problem.
Keep a working fire extinguisher in the work area.
