Pitney Bowes SHG7, Руководство оператора

Страница: 16 / 20

SV62931 Rev. C | Operator Guide
16 | SHG7 Cross-Cut Shredder
Cleaning the Photocells
If paper particles should come to rest in the inlet guide (“Figure 4 Cleaning the Photocells”), for
example after a paper jam, it is possible that the machine will not turn off, due to the broken light
barrier.
To remove these paper strips and also to clean the photocell, pass another sheet of paper through
the feed slot, or switch the machine to reverse and wipe both “eyes” of the photocell with a brush.
Figure 4 Cleaning the Photocells
4
Disposing Of The Machine
Dispose of the machine in an environmentally friendly fashion at the end of its useful
service life. Do not dispose of any of the parts included in the machine or its packaging
with household waste.
Emptying the Collection Bin
When the collection bin becomes full of paper , the collection bin full icon lights up and the
machine turns off.
1. Pull out the collection bin and empty the contents.
2. Push back in the emptied collection bin all the way.
3. If the operation error
icon lights up, press the
forward
button briefly. The remaining
material in the feed slot is shredded and the operation error icon light goes out.
NOTE:
The machine will only run if the collection bin is properly pushed in.