Pitney Bowes relay 2000, Руководство оператора

Страница: 50 / 92

3 ● Run a Job
3-10 SV63139 Rev. A
Run a Trial Piece
Run a trial piece to test the job settings.
1. Load material and press the
Trial Piece button on the control panel to
run a trial piece and verify the job setup is correct.
2. You can still make changes to the job settings at this point if the trial
piece needs fine tuning. (This requires Supervisor level access.)
a. Press the Setup button.
b. Log in at a Supervisor access level.
c. Use the
Prev (◄), Next (►) and Change ( +/- ) buttons to scroll
through the settings and modify the one(s) you wish to change.
3. When you have made the necessary changes, press
Setup
again to
return to run mode.
4. Run another trial piece to test the modified settings.
Material Changes or Double Detect Issues During Operation
If you load material during a job run with different characteristics (weight,
color shade, etc.), OR if you have problems with the double detect, run
another trial piece.
This causes the inserter to recalibrate the double detect function for the
new material.