Pitney Bowes relay 2000, Руководство оператора

Страница: 8 / 92

Safety
viii SV63139 Rev. A
• Operation of this equipment without periodic maintenance will inhibit
optimum operating performance and could cause the equipment to
malfunction.
• Always follow specific occupational safety and health standards for
your workplace.
• To reduce the risk of fire or electrical shock, DO NOT attempt to
remove covers or disassemble the control panel or its base. The
cabinet encloses hazardous parts.
• Before operating the main inserting machine with this device, make
sure the machine has been properly prepared and that any other
personnel in the area are standing clear of the inserter.
• Immediately report to service any damaged or non-functioning
components that renders the unit unsafe.
• Contact your system supplier for the following:
- Supplies
- Material Safety Data Sheets
- If you should damage the unit
- Required maintenance service schedule
If your Stacker has an AC Adapter:
• Use the AC power adapter included with this device. Third party
adapters may damage the device
• To protect against electrical shock, plug the AC adapter power cord
into a properly grounded wall outlet.
• DO NOT route the power cord for the AC adapter over sharp edges or
trap it between it between pieces of furniture. Make sure there is no
strain on the power cord.
IMPORTANT:
Some of the inserter features and options covered in
here may not be available on your inserter.