background image

791-6022 

rev. 03/14/17

SPECIFICATIONS

Capacity .....................................................3/4 Ton (1500 Lbs.)
Low Height .............................................................................4"
Raised Height ......................................................................17"
Length ........................................................................... 38-7/8"
Chassis Width ............................................................... 18-1/2"
Lift Rails (2 each) .......................................3" wide x 17" Long
Shipping Weight ............................................................ 95 lbs.

MODEL # 791-6022

1,500 LB. CAPACITY

ATV LIFT

• Read, study, understand & follow all instructions before 
using. • Inspect the jack before each use.  Do not use if 
damaged, altered, modified, in poor condition, leaking 
hydraulic fluid or unstable due to loose or missing 
components.  Make corrections before using. • Use of this 
product is limited to lifting, lowering, transporting/storing 
(only in the lowered position) ATV's and motorcycles with 
exposed frame undercarriages. • Use only on a hard level 
surface. • Keep operator's and bystander's head, hands 
and feet away from lift arms when raising and lowering. 
• User and bystanders must wear eye protection that meets 
ANSI Z87.1 and OSHA standards. • Do not use jack beyond 
its rated capacity.  Do not shock load. • Center load on 
lift platform. Secure load with appropriate restraint device. 
• Immediately after lifting a load, ensure lift's mechanical 
load-holding means are engaged. • Lift only on areas of the 
vehicle as specified by the vehicle manufacturer. • Before 
moving, lower the load to the lowest possible point. 
• Restraining an incompatible load will not make the load 
secure and may cause unexpected loss of load. • Never 
work on, around or under a load that is not secure and 
stable. • Only attachments, restraints or adapters supplied 
by NAPA shall be used. • Always lower the jack slowly and 
carefully. • No alterations shall be made to this product. 
• 

This product contains chemicals known to the State 

of California to cause cancer and birth defects or other 
reproductive harm. 

Wash hands thoroughly after handling.

 

• Failure to heed these warnings may result in serious or 
fatal personal injury and/or property damage.

WARNING

BEFORE USING THIS DEVICE, READ THIS 
MANUAL COMPLETELY AND THOROUGHLY, 
UNDERSTAND ITS OPERATING  
PROCEDURES, SAFETY WARNINGS AND 
MAINTENANCE REQUIREMENTS.

It is the responsibility of the device owner to make sure all personnel 
read this manual prior to using the device. It is also the responsibility 
of the device owner to keep this manual intact and in a convenient  
location for all to see and read. If the manual or product labels are lost 
or not legible, contact NAPA for replacements. If the operator is not 
fluent in English, the product and safety instructions shall be read to 
and discussed with the operator in the operator's native language by 
the purchaser/owner or his designee, making sure that the operator 
comprehends its contents.

Содержание 791-6022














Отзывы: