Pitney Bowes OptiFlow DIVS, Руководство оператора

Страница: 17 / 24

Operator Guide
13 SV61322 Rev. C
Stacker Error Messages Displayed by DI900/DI950 Inserter
Error Message Solution Displayed Additional Comments
230 — VPS Entry
Nip Jam
Stacker stopped.
Remove material
from stacker.
Check for and clear obstruc-
tions in the stacker, espe-
cially in the entry area. It
may be necessary to open
the stacker (see page 7) to
completely clear the stall.
Press inserter START button
to resume operation.
231 — VPS Cam
Error
Stacker stopped. An
error occurred while
performing an op-
eration.
Check for and clear any
stalled material. Press Reset
button on stacker. Press
inserter START button to re-
sume operation. If this condi-
tion persists, call for service.
232 — VPS Cam
Overcurrent
Stacker stopped. An
error occurred while
performing an op-
eration.
The stacker stopped to
protect against a motor
overload. This is often due
to a stack that's too heavy.
Try removing finished mail
pieces more frequently or
lower stack wall height. Press
Reset button on stacker and
press START to resume op-
eration.
233 — VPS Stack
Overfull
Stacker full. Clear
stacker.
Empty the stacker. See
Optmzng Materal Stackng ,
page 9, for details on adjust-
ing stack height for your
material,
234 — Stack
Current Limit
See error 232 above.
389 — Almost Full
Warning
Stacker almost full.
Clear stacker.
Empty the stacker to avoid
a stacker-full condition and
system stop.
433 — VPS Cover
Open
VPS cover open;
close cover.
The stacker is not completely
closed. Close the stacker all
the way and push DOWN on
the release lever to lock it in
position.