Pitney Bowes OptiFlow DIVS, Руководство оператора

Страница: 6 / 24

OptiFlow™ Vertical Power Stacker
2 SV61322 Rev. C
Optiflow™ Vertical Power Stacker Technology
The Optiflow™ Vertical Power Stacker is a compact, powered, bot-
tom-feed stacker that connects to the output of several Pitney Bowes
Document Inserting Systems, including the DI380/DI425, the DI500/
DI600 and the DI900/950 Series. It neatly stacks the mail pieces fed
from the inserter and keeps them in the same order as they were
originally loaded.
Sensors in the stacker monitor the mail pieces fed into it; if a mail-
piece should stall or the stacker fills up, the inserter stops automati-
cally. The stacker is designed for continuous unloading during mail
runs to maintain best productivity. Unloading "on-the-fly" keeps your
mail run going and helps avoid unnecessary interruptions.
Capacity
The stacker has a maximum capacity approximately equal to one
standard USPS mail tray (21-inch stack). Actual capacity will vary,
depending on mail piece thickness and environmental conditions.
The stacker provides enough capacity so that by unloading on-the-
fly, you are free to take care of other mail operations. The mail stack
reaches maximum height only if you cease to unload on-the-fly.
The stack height grows until it either trips the stacker-full sensor or
trips another sensor that protects the motor from overloads due to a
heavy stack.
Stacker-to-Inserter Communications
Communications between the inserter and stacker are handled by a
serial (DI380/DI425 and DI500/DI600) or USB (DI900/950) interface
cable. The stacker interface is "intelligent," which means the inserter
will stop automatically when the stacker stops due either to an error
or stacker-full condition.
Stacker Access
For DI380/DI425 and DI500/DI600 Series Inserters, a sliding tray as-
sembly allows you to easily move the stacker away from the inserter
to clear stalled mail pieces.
For DI900/950 Series Inserters, a hinged mount allows you to open
the stacker to clear stalled mail pieces.