Pitney Bowes OptiFlow DIVS Скачать руководство пользователя страница 14

Страница: 14 / 24

OptiFlow™ Vertical Power Stacker

SV61322 Rev. C

Error Message

Solution

Additional Comments

E197 — Power

Stacker Obstruction

Remove material

from Power Stacker,

check for obstruc-

tions, Press Clear

Deck to continue.

None.

E198 — Power

Stacker Not

Engaged

The power stacker is

pulled away from the

inserter. Push firmly

toward the inserter

until the stacker is

fully engaged.

This is caused by not mov-

ing the stacker back into its

proper position against the

inserter.

NOTE

: The stacker uses rails

to make it as easy as possi-

ble to slide the stacker in and

out. If for some reason the

rails are bent and the stacker

can not be moved back to

its proper position, this error

could persist. Call for service

if you notice this situation.

E108 — Power

Stacker Not

Detected

Check the power

stacker connections,

press Cancel and

then Start to retry. If

unsuccessful, select

Uninstall Stacker.

See comments at

right.

Check the cable that con-

nects the stacker and inserter

for correct installation. If this

problem persists, call for

service.

NOTE:

If you like, you can

select "Uninstall Stacker" (an

option on the inserter display

that appears with this mes-

sage) and disable the stacker

connectivity. This allows you

to run the stacker in non-

communicating mode until

service can resolve the prob-

lem. See page 14 for details.

E109 — Empty The

Power Stacker

Remove completed

mail pieces from the

power stacker.

The stacker needs to be

emptied. See

Gettng the

Most from Your Stacker

for

details on adjusting stack

height for your material.

Stacker Error Messages Displayed by DI500/DI600 Inserter

(Continued)

Содержание OptiFlow DIVS

























Результаты поиска

Содержание OptiFlow DIVS

Отзывы:

Бренды по названию

Популярные бренды

Pitney Bowes OptiFlow DIVS, Руководство оператора

Результаты поиска

Содержание OptiFlow DIVS

Отзывы:

Бренды по названию

Популярные бренды