manualshive.com logo in svg

Pitney Bowes DM500, Руководство оператора, Страница: 146 / 200

Поделиться
Скачать
Pitney Bowes DM500 Скачать руководство пользователя страница 146

9-14

SV60890 Rev. G

9 • Maintaining and Updating

Cleaning the 
Printer Nozzle

   You can clean the printer nozzle at any time by following these steps:

1.  From the IntelliLink® Control Center, press the 

Menu 

key. 

2. Select 

Maintenance

.

3. Select 

Clean Printer Nozzle

. The “Cleaning Print Nozzle” screen dis-

plays until the cleaning operation completes.

4.  Once the cleaning operation completes, the “Print Test Pattern” screen 

appears. 

5.  Print a test pattern as described above in Printing a Test Pattern to 

verify that you can print a clean and clear meter stamp.

6.  Repeat this operation at least one more time. 

8.  Once the cleaning operation completes, the “Print Test Pattern” screen 

appears again. 

9.  Repeat steps 5 and 6 again. If the print pattern still has broken or miss-

ing lines, you may need to replace the ink cartridge (see 

Replacing the 

Ink Cartridge

) or printhead (see 

Changing the Printhead

).

 

If the test pattern is ok, go to step 10. 

10. Press the left arrow key to return to the postage screen. 

Printing a Test 
Pattern

continued

Содержание DM500









































































































































































































Отзывы:

Нет отзывов