manualshive.com logo in svg

Pitney Bowes DM500, Руководство оператора, Страница: 120 / 200

Поделиться
Скачать
Pitney Bowes DM500 Скачать руководство пользователя страница 120

8-2

SV60890 Rev. G

8 • Reports

Introduction

Creating a report is quick and easy on your mailing system. With the capa-
bility to print out reports on roll tape or envelopes using the internal mailing 
system printer, you can easily keep an accurate record of all your mailing 
activities.

NOTE:

  The accounting reports described in this chapter are for the Standard 

accounting package provided with your DM Series™ Digital Mailing System. If 
you are using another optional accounting package (for example, Budget Man-
ager), refer to the documentation provided with that application.

For some reports, you need an external or attached printer. For instruc-
tions on how to set up an attached printer, refer to 

Chapter 5 - Mailing Sys-

tem Setup, Set Up Optional Printer

, in this guide.

Each report is described in the following sections. Each section shows you 
the display on the screen and the information that prints out.

How To View a Report

1. Press 

the 

Reports

 key.

2.  Select the report you want to print. The report appears in the main dis-

play.

Printing a Report

You may print reports using the internal mailing system printer, or an at-
tached external  printer if one is connected to your system. 

How to Print a Report

1. Press 

the 

Reports 

key.

2.  Select the report you want to print. The report appears in the main dis-

play. Press 

Enter

.

3.  Depending on your particular system, select one of the bulleted op-

tions below.

• 

If your system can only print using the internal mailing sys tem 
printer: press the 

Start 

or 

Tape 

key to print on an en ve lope or tape. 

• 

If you have an external printer and your report can only print to an 
external printer, the system asks you to press 

Enter

.

• 

If you have an external printer and your report can print to an exter-
nal printer or the internal printer, the system  asks you to “Se lect a 
Printer.”

4.  If you want to use the attached ex ter nal printer, select 

Attached Print-

 er

. Press Enter.

 

If you want to use the system printer, select 

Mailing Machine

.  Press 

the 

Start 

or 

Tape 

key to print on an en ve lope or tape. 

Содержание DM500









































































































































































































Отзывы:

Нет отзывов