manualshive.com logo in svg

Pitney Bowes DM230L, Руководство оператора

Поделиться
Скачать
Pitney Bowes DM230L Скачать руководство пользователя страница 108

SV61891 Rev. A

6-5

DM230L, DM330L, DM350L Operating Guide

5.  Clean the brush in plain water, and rinse thoroughly.
6.  Position the brush as shown above so its bottom edge is under the 

mounting tabs.

7.  Slide the brush back toward the rear of the moistener.

3.  Place the wick in the holder.
4.  Reinstall the wick and holder assembly.

Remove the Holder and Wick (DM230L/DM330L)

Wick

Holder

1.  Remove the holder and wick from 

the moistener as shown here.

2.  Clean the wick in plain water, and 

rinse thoroughly.

1.  Line up the yellow tab with the 

yellow slot.

2.  Slide the moistener tank into 

position on the mailing machine 
base until the release lever 
snaps into position. See the 
figure at right.

3.  Resume operation.

Reinstall the Moistener Tank (DM230L/DM330L)

Removing and 
Cleaning the 
DM230L/DM330L

continued…

Содержание DM230L































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды