Pitney Bowes DI900 Скачать руководство пользователя страница 9

Страница: 9 / 196

SV61311 Rev. E

USA Contacts

Product Name - DI900 or DI950

▪ For frequently asked questions, go to:

www.pb.com

and click on

Customer Support

▪ To place requests for service or training, go to:

www.pb.com

and click on

My Account

▪ To order supplies and accessories, call the Supply Line

™

at: 1.800.243.7824 or go to:

www.pb.com

and click on

Online Store

▪ To view and pay invoices online, go to:

www.pb.com

and click on

My Account

▪ To view inventory, go to:

www.pb.com

and click on

My Account

▪ For direct questions, call: 1.800.522.0020. Customer Service Representatives are

available Monday through Friday, 8:00 AM - 8:00 PM ET.

• To obtain Material Safety Data Sheets, call the Supply Line

™

or go to:

www.pb.com

and

click on

Customer Support

Canada Contacts

Product Name - DI900 or DI950

▪ For frequently asked questions or to order supplies, go to:

www.ptneybowes.ca

▪ For direct questions, call: 1.800.672.6937. Customer Service Representatives are

available Monday through Friday, 8:30 AM - 4:00 PM ET.

Contact Information List

Содержание DI900





































































































































































































Результаты поиска

Содержание DI900

Отзывы:

Pitney Bowes DI900, Руководство оператора, Страница: 9 / 196

Результаты поиска

Содержание DI900

Отзывы: