Pitney Bowes DI900 Скачать руководство пользователя страница 85

Страница: 85 / 196

SV61311 Rev. E

3-43

Basic Operation • 3

Moving an Item

relocate a item within a mail piece collation order:

1. From the Home screen select "Menu", "Jobs" and then "Edit Current

Job". The Edit Job screen will display.

2. Use the UP/DOWN Arrow Keys to select the item. A highlight will appear

around the selected item.

3. Select "Move Highlighted Item". The Move Item Location screen, shown

below, will display.

4. Use the UP/DOWN Arrow Keys to move the red insert marker to the

area in the collation where you want to relocate the item.

5. Select "Accept Highlighted Location". You will be returned to the Edit

Job screen.

NOTE:

Recheck the Mail Piece Icon Tree. Moving an item can cause the

Feeder assignment to change. If it does, be sure to load the designated item

into the correct Feeder.

Move Item Location Screen

Press

to select location.

Move Item Location

Job: 123

Accept Highlighted Location

Содержание DI900





































































































































































































Результаты поиска

Содержание DI900

Отзывы:

Pitney Bowes DI900, Руководство оператора, Страница: 85 / 196

Результаты поиска

Содержание DI900

Отзывы: