Pitney Bowes DI900 Скачать руководство пользователя страница 160

Страница: 160 / 196

8-16

SV61311 Rev. E

8 • Scanning

Reviewing

a Scan

Configuration

If necessary, you can view a list of marks associated with the Scan Configu-

ration without entering the Edit mode.

NOTE:

This option is only available if the PC Control is set to "No".

1. From the Home screen, select "Menu" then "Tools".
2. Select "Configure System" then "Scan Configuration Setup".

NOTE:

If you are not logged in with supervisor or manager access rights, you

will be prompted to enter an access code.

3. Select the appropriate scan type.
4. The Scan Configurations for the selected scan type display. Use the UP/

DOWN arrow keys to select the Scan Configuration you want to review.

5. Select "Review Highlighted Item".
6. The Review Scan Code screen displays. The marks associated with the

configuration appear in the Functions list. Use the UP/DOWN arrow keys

to select the Function you want to review.

7. Select "Finished" once you have reviewed the list.

Viewing the Job

List

Allows you to view the jobs associated with the selected Scan Configuration.

NOTE:

This option is not available if there are no jobs associated with the se-

lected Scan Configuration.

1. From the Home screen, select "Menu" then "Tools".
2. Select "Configure System" then "Scan Configuration Setup".

NOTE:

If you are not logged in with supervisor or manager access rights, you

will be prompted to enter an access code.

3. Select the appropriate scan type.
4. The Scan Configurations for the selected scan type display. Use the UP/

DOWN arrow keys to select the Scan Configuration with the job list you

want to view.

5. Select "View Job List for Highlighted Item".
6. The View Job List screen displays. Use the UP/DOWN arrow key to

scroll through the job list.

7. Select "Cancel" to return to the Scan Configuration screen.

Содержание DI900





































































































































































































Результаты поиска

Содержание DI900

Отзывы:

Pitney Bowes DI900, Руководство оператора, Страница: 160 / 196

Результаты поиска

Содержание DI900

Отзывы: