Pitney Bowes DI900 Скачать руководство пользователя страница 50

Страница: 50 / 196

3-8

SV61311 Rev. E

3 • Basic Operation

Tray Information

The Mail Piece Icon Tree in the Home screen provides information about

each item in the mailing. Each icon represents a document in the current

job. Use the Arrow Keys to highlight any document icon. When an icon is

highlighted, any or all of the following information will display:

•  Graphic of the document/media type.
•  Tray type into which the document/media should be loaded.
•  Orientation of the document in the Tray.

It is important to loosen (fan) any items in the stack that may be stuck to-

gether BEFORE you place the material in the Tray. To do this:

1.  Hold one end of the stack in one hand.
2.  Flip through the opposite end of the stack with your other hand.
3.  Repeat this with the other end of the stack.

Loading Material

into the Trays

Figure 3.2: Loosen (Fan) Material

Содержание DI900





































































































































































































Результаты поиска

Содержание DI900

Отзывы:

Pitney Bowes DI900, Руководство оператора, Страница: 50 / 196

Результаты поиска

Содержание DI900

Отзывы: