manualshive.com logo in svg

Pitney Bowes DI900, Руководство оператора, Страница: 148 / 196

Поделиться
Скачать
Pitney Bowes DI900 Скачать руководство пользователя страница 148

8-4

SV61311 Rev. E

8 • Scanning

Scanning 

Features

Dynamic Envelope Selection

Dynamic envelope selection allows you to create scanning jobs on DI950 

systems (with or without a High Capacity Sheet Feeder) that will insert mail 

piece contents into either letter-sized or flat envelopes. 
Letter-sized envelopes are loaded at the High Capacity Envelope Feeder. 

Flat envelopes are loaded at the Feeder Tower, and can be linked so that 

they feed from Feeder A and Feeder C.

NOTE:

  You cannot use a windowed flat envelope with Top Address, Z folded jobs.

This feature is implemented in one of two ways:

•  Using the Envelope Select (ES) scan mark. The Envelope Select scan 

mark is available on systems that have BCR scanning or the Selective 

Operations level of OMR scanning enabled. Refer to 

BCR and OMR 

Mark Levels

 in this chapter for more information about the various levels 

of scanning.

•  Setting the “Item Overcount Action” to “Use Alternate Envelope”. Refer 

to 

Creatng a Job

 in 

Chapter 3

 or

 Assgnng a Scan Confguraton to an 

Exstng Job

 in this chapter for more information.

Jobs using dynamic envelope selection must be set up with two outer en-

velopes. The first set in the job must contain the information necessary to 

make the envelope selection (either the Envelope Select scan mark or “Item 

Overcount Action” setting). Secondary sets of scanned material, generic 

(non-scanned) material, or sets containing select fed sheets can be included 

in a dynamic envelope selection job. 
Additionally, a single Reply Envelope (BRE) can be included in the job. If 

you wish to add an insert type other than a BRE to the flat envelope, the in-

sert must be called a BRE in the Mail Piece Icon Tree.

NOTE:

  Thick inserts (such as booklets) may have trouble accumulating in the 

Pre-fold Accumulator and are not recommended for use.

The BRE/insert will accumulate with the flat set in the Pre-fold Accumulator 

prior to insertion into the envelope.
Currently, dynamic envelope selection cannot function with the Batch mode, 

or with any of the divert functionality.

Содержание DI900





































































































































































































Отзывы:

Нет отзывов