background image

Operation • 2

2-15

SV61656 Rev. A

Setting Insert Feeder 

Select whether you want to use 

the insert feeder and, if so, how it 

will be used.
Press 

Change

 (

+/-

) until you see 

the option you want:

 

On Double Detect

 

 

 

Feeder on with the double detector operating. (The double 

detector stops the machine if two or more inserts feed simul

-

taneously from the feeder).

 

On

 

 

 

Feeder on without the double detector.

 

Off

 

 

 

Feeder turned off for this job.

When the insert feeder is set as required, press 

Next

 (►) to ad

-

vance to the next setting…

Mode

The machine needs to know if the job requires inserting into an en

-

velope or if it is a fold-only job.
Press 

Change 

(

+/-

)

 

to switch between the options:

 

Insertion Mode

  

 

Activates the envelope feeder for a normal inserting job.

 

Fold-Only Mode

 

 

 

Turns the envelope feeder off and makes the machine act as 

a folding machine.

When the mode is set, press 

Next

 (►) to advance to the next set

-

ting…

Содержание DI380 OfficeRight





































































































Отзывы: