Pitney Bowes DI380 OfficeRight Скачать руководство пользователя страница 10

Страница: 10 / 100

1 • Introduction

1-4

SV61656 Rev. A

Processing speed will vary, depending on machine configuration.

See

Specifications

in Chapter 4 for further details.

Some models are equipped with OMR (Optical Mark Recognition)

scanning.
An OMR mark is normally a dark solid line on a sheet of light colored

paper that is perpendicular to the direction of paper travel. This line

must be thick and dense enough to trigger the system’s OMR scan-

ner.
The scanner, working with the OMR system software, checks for one

or more different OMR marks on a document as it feeds through the

system. Tracking of these marks enhances mail piece integrity by

assuring that documents that belong together (a set) stay together

throughout the inserting process.
OMR-equipped models have scanning heads located on each of the

sheet feeders.
Instructions for using OMR functions appear in Chapter 3 of this

guide.

Bottom Sheet

Feeder Scanner

Top Sheet

Feeder Scanner

Содержание DI380 OfficeRight





































































































Результаты поиска

Содержание DI380 OfficeRight

Отзывы:

Pitney Bowes DI380 OfficeRight, Руководство оператора, Страница: 10 / 100

Результаты поиска

Содержание DI380 OfficeRight

Отзывы: