PISCO RPV06 Series, Руководство пользователя, Страница: 2 / 30

2
Rotary Vacuum Pump
Features
Contribute to energy saving
Additional models
Light weight
Compact
Low heat generation
Low driving noise
Low vibration
Long life
Low generation of dust
Contribute to environment
Safe design
Variety of options
▶
Monthly electrical consumption is 46% less than equivalent other brand pump.(*)
▶
The top level high efficiency in the industry is realized for the pumping speed per motor power 1(W).
 1.0/1.2 [pumping speed (l/min)/motor power (W)] (50/60Hz)
* According to our investigation using RPV062-60T200 by 24 hours operation. It is only a reference value since it differs by operational conditions.
▶
The built-in power switch models for single phase 100VAC pumps (twin in-line & parallel layout
pumps). Just plug-in the power plug in to 100VAC outlet to operate.
▶
Single phase 110/115VAC type and inch size push-in fittings are newly added.
▶
Space saving is realized by adoption of the special rotor form.
*Max weight and max. dimension are of 120L type RPV064-120V200.
▶ Max weight: about 10.5Kg
▶ Max. dimension: 125 x 397.6 x 181mm (width x depth x height)
▶
About 20ºC lower than equivalent other brand model, and it suppresses the temperature rise in
the room (or within equipment). (* our investigation)
▶
Low generation of heat is realized by adoption of forced air-cooling system.
▶
No sliding of the rotary shaft seal by adoption of magnet-coupling results in no heat generation by seal.
▶
Low noise operation and low vibration are realized by full balancing design for rotary part.
* Our investigation. Same level as air conditioner or quiet car
▶
Silent :
≦
58
㏈
[50
㎐
]
▶
About 1/10 of equivalent other brand models. (*)
▶
High durability is realized by adopting of super engineering plastic, which is excellent in self-lubricity
and wear resistance, and special surface treatment.
▶
Providing minimum clearance between rotor and cylinder wall, realize the fundamentally contactless
structure and minimization of sliding parts.
▶
Adoption of magnet-coupling, no sliding seal required.

No maintenance necessary by seal abrasion.

Support to longer operation life of motor by minimizing load to the motor shaft part.
▶
Maintenance free for nearly 3 years operation.
(* Under our operating conditions.
The lifetime varies based on the operating conditions and suction gas (dust / water mist) and so on.)
▶
Lubrication is unnecessary by adoption of the excellent clean vacuum grease for low dust and low volatile.
▶
Low dust generation is realized by minimization of sliding parts.
Suppress environmental pollution such as abrasion powder created by vane pump.
▶
Contamination to surrounding area is controlled.
▶
RoHS compliance
▶
CE marking corresponding
▶
Not only a pump but also push-in fittings and exhaust cleaners (exhaust mufflers) are prepared.
▶
Additionally, compression fitting, which is suitable for medium vacuum model (RPV06A model)
that emphasize airtightness, is added.