Piscine Solide V35048, Руководство по установке

Страница: 32 / 49

No Diving or Jumping. Observe all Safety Rules
GENERAL INSTRUCTIONS - ROUND POOLS
ASSEMBLING THE POOL WALL
Section
3
2. Fasten the liner place
2-1.
For UBEAD/HUNG/J or V-BEAD LINER ONLY
(Please see step 2-2. or 2-3. for other liner)
a. With a V-Bead liner coping is not needed. You can
discard those pieces (if they are included).
b. The top of the wall of the liner has what is called a
“V-Bead” welded onto it. Simply open up the bead
with your fingers and hang it directly on top of the pool
wall. When this is done properly, the only portion on
the outside of the pool wall is approximately 1” of the
V-Bead. No printed liner material is actually going over
the top of the wall to the outside of the wall.
(Image 23)
c. Make sure the bead is on evenly around the entire pool,
and that the liner is hanging straight down from the top of
the wall. The liner should not have creases in it because
it is twisting around the pool. If the liner is twisting, it
is because it is not sitting properly in the pool. Make
necessary adjustments before proceeding.
NOTE: Some liners may fit very tightly, it is better to install
uprights, top plate and rail before going onto next step.
See Section 4.
3. Proceed to Section 4 -
Installing the Pool Frame
C. CONT. INSTALL THE POOL LINER
20
LINER
POOL WALL
SLOTTED TUBE
Please ensure to follow instructions that match the type of liner you may have.
3-8