Piscine Solide V35048, Руководство по установке

Страница: 16 / 49

No Diving or Jumping. Observe all Safety Rules
1-4
1. Mark out the Area
a. Drive a peg into the ground at the centre of the area
where you want your pool.
(Image 1)
b. Use a length of string tied between the peg and a can
of spray paint, and mark a circle on the ground (a tape
measure can also be used). The circle will be 12” (30 cm)
bigger all round than the pool.
(Image 2)
2. Remove the sod
a. Remove all sod and plants from the circle.
(Image 3)
b. Remove any sticks, stones and roots from the circle
using a rake.
c. To make sure your pool is stable, compact the ground
well, use the compactor, before adding the sand.
B. PREPARE THE FOUNDATION OF YOUR POOL
GENERAL INSTRUCTIONS - ROUND POOLS
GROUND PREPARATION
Section
1
1
2
3
Important Note:
Your pool must be perfectly level. Take the time you need to be
sure your foundation is perfecty level.