12
It is important to use Teflon® for all threadings so as to make sure that it is waterproof. Install the gate (P) with a
screwdriver. Finally, place the basket (S) inside the skimmer and the lid (V) on top of it.
CONNECTING A VACUUM CLEANER TO YOUR SKIMMER
For filters with a minimum capacity of 6 m
3
/h, install the filter adapter (XM) on the basket (S) inside the
skimmer (Q). Connect one hose end to this adaptor and the other end to the vacuum cleaner (or robot, if your
filter capacity allows this). Connect the vacuum cleaner to a stick or a pole.
Fill the swimming pool up to halfway of the skimmer gate so that the water will go inside the skimmer and fill
the filtering system.
WATER MAINTENANCE
All swimming pools need chemical treatment to maintain the sanitised and crystal clear water. Check with
your chemical products supplier to determine which are best for your needs. Water treatment procedure is not the
same everywhere since it depends on the water quality in each region.
WARNING: An incorrect treatment may cause water pollution which can result in infections, poisoning or disease.
The best water quality is obtained by using the right treatment. To prevent the growth of algae and bacteria,
use bactericide, algaecide, water pH correctors and flocculants (except for cartridge filters). Apply the first
chlorine treatment within 24 hours of filling in the pool.
Never add chemical products directly to the water. Chemicals must be diluted before being introduced into
the water. Otherwise the liner could be damaged. However, it is easier to keep the water clean than to clean
already polluted water. Use your filter frequently.
Water maintenance is the most important factor in making your pool liner look excellent and last for a long
time. Therefore, follow the instructions in the filter manual. The filter capacity must be high enough to filter the
water of the pool 3 times every 24 hours. The filter must be connected even when there is nobody in the pool.
Make sure to check the water at least once a week, to keep the pool in optimum condition.
Make sure that you do the following on a frequent basis:
- Analyse the water pH and make sure it is between 7.2 and 7.6.
- Analyse the chlorine level and make sure it is between 0.5 and 2 grams per cubic meter.
- Remove any leaves and insects from the water.
Make sure that you do the following on a weekly basis:
- Add the correct maintenance quantity of algaecide.
- Add anti-calcareous product if lime is formed or the water is hard.
- Use flocculants to improve filtering (except when using a cartridge filter).
SAFETY MEASURES FOR HANDLING CHEMICAL PRODUCTS
The following precautions must be followed when handling chemical products:
- Use gloves to protect your hands and a mask or goggles for eye protection.
- No smoking where the products are stored or used. Many products are flammable.
- Wash your hands and face after using the products.
- Store the products in a dark and dry place. Do not leave the products in the sun.
- Make sure that the containers are closed. Tighten their caps or lids.
- Do not leave the products within the reach of children. Make sure that the products are stored out of reach in a
safe place.
- Do not re-use empty containers.
- Keep the products in their original containers.
- Do not remove the labels from the containers.
- Make sure that the storage area for chemical products has proper ventilation.
- When raining, increase the amount of chlorine and anti-algae bactericide.
- When adding water to the pool, check again the chlorine and anti-algae bactericide level.
- Keep the place where the chemical products are stored well ventilated.