(c)
TIME SETTING
The RST button must now be pressed two times to cause the hours digits to flash. The correct hour
can be set in as described above.
Pressing the RST button once again will now cause the minutes digits to flash. The minutes should
be set to the next minute to come up at the zero seconds time mark. The RST button is pressed once
more to hold the time displayed. At the time mark, the ST-SP button is pressed momentarily to begin
the counting at the exact second.
If the minutes are not advanced when they are flashing in the set mode, pressing the RST button will
return the clock to the normal timekeeping mode without altering the minutes timing. This feature
is useful when changing time zones, when only the hours are to be changed.
(d)
AUTOMATIC DATE ADVANCE
The calendar function will automatically advance the date correctly according to the four year
perpetual calendar. One day must be added manually on Feb. 29 on leap year. The date advances
correctly at midnight each day.
(e)
DISPLAY TEST
Pressing both the RST and ST-SP buttons at the same time will result in a display test function.
SECTION 5 - PERFORMANCE
No changes to the basic performance provided by Section 5 of this Pilot’s Operating Handbook are
necessary for this supplement.
REPORT: VB-880
ISSUED: DECEMBER 18, 1980
9-20
REVISED: NOVEMBER 20, 1981
SECTION 9
PIPER AIRCRAFT CORPORATION
SUPPLEMENTS
PA-28-161, CHEROKEE WARRIOR II
Содержание CHEROKEE WARRIOR II
Страница 253: ...Piper PA 28 161 28 7916159 N3067D ...