(4)
With HDG bug centered select NAV or APPR mode and note control wheel movement
toward VOR needle offset.
(5)
Select REV mode and note control wheel movement opposite VOR needle offset.
(6)
Disengage autopilot.
(7)
Check aileron controls through full travel to assure complete autopilot disengagement.
(c)
AUTOPILOT WITH COMPASS SYSTEM (NSD 360A)
(For other compass systems, refer to appropriate manufacturer’s instructions)
(1)
Check slaving switch in slave or slave 1 or 2 position, as appropriate. (Slaving systems with
R.M.I. output provide only slave and free gyro positions.)
(2)
Rotate card to center slaving meter - check HDG displayed with magnetic compass HDG.
(3)
Perform standard VOR receiver check.
(4)
Perform Steps (1) - (7) in Section 4 item (b) except in Steps (4) and (5) substitute course arrow
for HDG bug when checking control wheel movement in relation to L/R needle. HDG bug is
inoperative with NAV, APPR, or REV mode selected.
(d)
IN-FLIGHT PROCEDURE
(1)
Trim aircraft for existing flight condition (all axes).
(2)
Rotate heading bug to desired heading. Engage autopilot.
(3)
During maneuvering flight - control aircraft through use of the HDG bug. (HDG mode)
(4)
For navigation operations select modes as required by the operation being conducted and in
accordance with the mode description provided in the Century 21 Operator’s Manual.
SECTION 5 - PERFORMANCE
No changes to the basic performance provided by Section 5 of this Pilot’s Operating Handbook are
necessary for this supplement.
ISSUED: AUGUST 14, 1980
REPORT: VB-880
9-17
PIPER AIRCRAFT CORPORATION
SECTION 9
PA-28-161, CHEROKEE WARRIOR II
SUPPLEMENTS
Содержание CHEROKEE WARRIOR II
Страница 253: ...Piper PA 28 161 28 7916159 N3067D ...